Discount Products: Look through products available for a 25% – 50% discount in 2020. The items provided on a first come, first serve basis. View Discounted Products
NL-UHV enables the generation and deposition of nanoparticles in an Ultra-High vacuum to create functionalized surfaces on samples.
The properties of the nanoparticle coatings can be precisely controlled, including size, composition, and structure, allowing for tailored properties.
NL-UHV instruments allow the direct deposition of ultra-pure nanoparticles on a wide range of substrates and materials.
The film density can be adjusted, and the coating adheres well to the sample surface.
Available in different configurations, including single 1″ and 2″ sources, as well as the triple 1″ source NL-DX3, which enables the deposition of up to three materials individually or as alloys.
The NL-QMS mass filter offers advanced control over nanoparticle deposition, allowing the scanning or filtering of nanoparticles by mass or diameter in real-time.
The NL-QMS is operated through user-friendly WindowsTM software, providing intuitive control over the deposition process.
Introducing the Ultra High Vacuum- Alloy Nanoparticle Deposition
The Nikalyte NL-UHV, Alloy Nanoparticle Deposition instrument, range enables the generation and deposition of nanoparticles in Ultra-High vacuum onto your sample to create a functionalised surface. The properties of the nanoparticle coatings can be tailored through the precise control over the size, composition and structure of the nanoparticles.
Unlike chemical techniques, the NL-UHV range of instruments allows the direct deposition of ultra-pure nanoparticles onto various substrates and materials. The film density can be tuned and the film itself can be highly adherent to the sample surface.
The NL-UHV is available with a single 1”, 2” source or a triple 1” source, the NL-DX3. The NL-DX3 allows the deposition of up to three materials individually or as alloys using two or three materials simultaneously.
For the ultimate control of nanoparticle deposition, the Nikalyte NL-QMS mass filter allows the deposited nanoparticles to be scanned or filtered by mass or nanoparticle diameter in real time, allowing you to optimise the growth conditions. The NL-QMS is controlled via our simple and intuitive WindowsTM software.
Key Features
Vary nanoparticle size distribution
Nanoparticle size from 1 – 20nm
Vary nanocoating layer density
Sub monolayer to 3D nanoporous coverage
Loosely bound to hightly adherent coatings
Control nanoparticle structure
Crystaline or amorphous structures
Control over nanoparticle shape
1 inch or 2 inch sources
deposition from single elemental or alloy target
high deposition rates upto mg/cm2/sec
DX3 – triple 1 inch source
load three different materials at once
generate alloy nanoparticles
deposit alternate elemental nanoparticles
independent operation of each target
Key Benefits
Nanoparticles are formed in a vacuum through a process called gas-terminated deposition. Control the properties of the nanoparticle coatings by varying a range of process parameters, including gas flow, gas type, magnetron power and aggregation length (Lg) or through changing the aggregation zone aperture size.
Vary nanocoating layer density
Sub monolayer to 3D nanoporous coverage
Loosely bound to highly adherent coatings
Vary nanoparticle size distribution
Nanoparticle size from 1 – 20nm
Control nanoparticle structure
Crystaline or amorphous structures
Control over nanoparticle shape
When used in-line with the NL-UHV the NL-QMS can be used to analyse and further filter the nanoparticle beam. Switch easily between measurement and filter mode to optimize and then deposit tailored nanocoatings.
Measure in-flight mass spectra
Analyse the mass spectrum of nanoparticles in flight
Mass range of 100 – 10 6 amu
Filter nanoparticle size
Select nanoparticle mass to pass through filter
Mass resolution in filter mode is +/-2%
Intuitive software
WindowsTM based software
Data logging of mass spectra
Preloaded mass calibration data for common materials
Enter parameters for new materials or alloys
Full control over QMS operation and scan settings
Ultra pure and hydrocarbon free
Generated from 99.999% solid source material
Wide choice of inorganic materials, including Au, Ag, Cu, Pt, Ir, Ni, Ti, and Zr
No cross-contamination when changing source materials
Generate compound nanoparticles such as nitrides and oxides
Trust the Experts at Spectra Research Corporation
Spectra Research Corporation (SRC) offers a range of innovative high-quality scientific products and laboratory services to industrial and scientific markets throughout Canada.
FABRX printers are GMP-ready and CE-marked with stainless steel parts that can be taken apart easily for efficient cleaning. The printheads are exchangeable, meaning you only need one printer for multiple technologies and printheads can be exchanged for cleaning to allow for continuous printing.
GMP Ready
Exchangeable Printheads
Fully Autonomous Printing
Auto Levelling Build Plate
Print Cost Calculation
Multi-Device compatibility
In-Built Camera
In-built Security Measures
Multi-file Type Support
Internal Storage and Management of Multiple Projects
The Energy 11 Twin-Screw Extruder can be set up for a wide range of applications encountered in current battery R&D. The fully ported, horizontally split barrel allows for flexible feeding of solid and liquid ingredients. Interchangeable die designs adapt to a range of materials from dry granules, polymeric solid-state electrolytes, and electrode films to wet slurries. Eight precisely controlled temperature zones along the barrel ensure flexibility in processing.
Introducing Henniker’s HPT-100 & HPT-200 Plasma Treatment Systems, cutting-edge, microprocessor-controlled benchtop units designed for optimal surface activation, cleaning, and modification of a diverse array of materials. Whether you’re looking for precise plasma etching or functional plasma coatings, these systems offer unmatched versatility and reliability. Elevate your surface treatment processes with the HPT-100 & HPT-200.
